Lawn mower parts should be well maintained if the user expects optimum performance when it is time to go to work. The blade needs to be kept nice and sharp to prevent damage to the grass when it is used. Sharpening the blade is something anyone can learn to do with the proper tools and directions.
The first step is to gather the supplies needed and spread them out on the ground next to the lawn mower.
* The eyes should always be protected by safety goggles when working with sharp objects.
* When working with tools, a thick pair of work gloves will keep the hands protected and aid in gripping the handle.
* A can of WD-40 will come in handy if the bolts are stubbornly tight.
* A bench grinder is the best tool to use but if a file grinder or angle grinder is used, a vice grip will be needed.
* The cutting device can be removed for easy cleaning with an ordinary ratchet and socket set.
* a spark plug wrench
* The cutting surface will have to be cleaned off with a scraper.
* It is necessary to secure the mower blade with a vice grip or C-clamp before attempting to sharpen or clean it.
Remove the spark plug from the mower before doing anything else. This will prevent the engine from starting up accidentally while working on the machine. Take the fuel cap off the tank and seal the hole with a piece of plastic. Put the cap back on and twist it tight. This keeps fuel from leaking out. This plastic must be removed when the job is done.
Tilting the lawn cutter up will provide easy access to its blade. Turning the machine completely upside down should be avoided to keep oil from leaking into the cylinder. The bolts may be stuck on pretty good. Coating the bolts with some WD-40 will make it easy to get them off. It will be necessary to keep track of where the bolts need to be replaced for when it is time to put the machine back together.
Remove the blade and wipe off any debris, dirt and dust sticking to it. Taking the time to clean the surface first will make it easier to sharpen the edge. This step will also help prolong the life of the machine because it will keep rust from forming.
An ordinary bench grinder is the best tool for this job. There is less risk of injury because the user has better control during the sharpening process. If an angle or file grinder must be used, a clamp or vise must be used to secure the part. All grinding must happen on the side closest to the motor. The side closest to the grass should be left alone. The beveled side is the one that should be sharpened.
Anyone who takes the right precautions is capable of doing this type of maintenance. Proper maintenance of lawn mower parts will ensure the grass is cut correctly and the machine will last a long time.
The first step is to gather the supplies needed and spread them out on the ground next to the lawn mower.
* The eyes should always be protected by safety goggles when working with sharp objects.
* When working with tools, a thick pair of work gloves will keep the hands protected and aid in gripping the handle.
* A can of WD-40 will come in handy if the bolts are stubbornly tight.
* A bench grinder is the best tool to use but if a file grinder or angle grinder is used, a vice grip will be needed.
* The cutting device can be removed for easy cleaning with an ordinary ratchet and socket set.
* a spark plug wrench
* The cutting surface will have to be cleaned off with a scraper.
* It is necessary to secure the mower blade with a vice grip or C-clamp before attempting to sharpen or clean it.
Remove the spark plug from the mower before doing anything else. This will prevent the engine from starting up accidentally while working on the machine. Take the fuel cap off the tank and seal the hole with a piece of plastic. Put the cap back on and twist it tight. This keeps fuel from leaking out. This plastic must be removed when the job is done.
Tilting the lawn cutter up will provide easy access to its blade. Turning the machine completely upside down should be avoided to keep oil from leaking into the cylinder. The bolts may be stuck on pretty good. Coating the bolts with some WD-40 will make it easy to get them off. It will be necessary to keep track of where the bolts need to be replaced for when it is time to put the machine back together.
Remove the blade and wipe off any debris, dirt and dust sticking to it. Taking the time to clean the surface first will make it easier to sharpen the edge. This step will also help prolong the life of the machine because it will keep rust from forming.
An ordinary bench grinder is the best tool for this job. There is less risk of injury because the user has better control during the sharpening process. If an angle or file grinder must be used, a clamp or vise must be used to secure the part. All grinding must happen on the side closest to the motor. The side closest to the grass should be left alone. The beveled side is the one that should be sharpened.
Anyone who takes the right precautions is capable of doing this type of maintenance. Proper maintenance of lawn mower parts will ensure the grass is cut correctly and the machine will last a long time.
About the Author:
Locate all the lawn mower parts you need by shopping at LawnEq.com. There are many types of riding mower parts you will find at good prices. Head online today for your needs.